I dug out my old trusty SGS2 to install CM13, the last time I used it was at the time of CM10.
I familiarized myself with the tutorials, and realized I have to re-partition the phone first, which requires TWRP. I downloaded the latest TWRP for the i9100 (3.0.2) and the Heimdall suite. Steps I took until failure:
1. Disable driver signature enforcement (I'm on W10)
2. Boot into download mode
3. Use zadig to replace the driver to libusb0
4. Use Heimdall to download the PIT file
5. Doesn't work - it gives me
Since I didn't get Heimdall to work, I thought to give Odin a try:
1. Downloaded Odin3 v3.11
2. TAR'd the TWRP IMG file
3. Tried to flash via Odin
4. Doesn't work - gives me:
My laptop only has USB3 ports, I tried all of them. The cable is fine, I tried another good one which also didn't change anything. I'm not sure if I miss some crucial step or doing something wrong, as I haven't touched the device in years and am not very familiar with flashing it. I'm just looking for the 'easiest' way to get to CM13.
Appreciate any help!
I familiarized myself with the tutorials, and realized I have to re-partition the phone first, which requires TWRP. I downloaded the latest TWRP for the i9100 (3.0.2) and the Heimdall suite. Steps I took until failure:
1. Disable driver signature enforcement (I'm on W10)
2. Boot into download mode
3. Use zadig to replace the driver to libusb0
4. Use Heimdall to download the PIT file
5. Doesn't work - it gives me
Quote:
| Initialising connection... Detecting device... Claiming interface... ERROR: Claiming interface failed! |
1. Downloaded Odin3 v3.11
2. TAR'd the TWRP IMG file
3. Tried to flash via Odin
4. Doesn't work - gives me:
Quote:
| <ID:0/005> Odin engine v(ID:3.1101).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> SingleDownload. <ID:0/005> twrp-3.0.2-1-i9100.img <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! <ID:0/005> <ID:0/005> Complete(Write) operation failed. |
Appreciate any help!
from xda-developers http://ift.tt/1U70TFH
via IFTTT
I dug out my old trusty SGS2 to install CM13, the last time I used it was at the time of CM10.
I familiarized myself with the tutorials, and realized I have to re-partition the phone first, which requires TWRP. I downloaded the latest TWRP for the i9100 (3.0.2) and the Heimdall suite. Steps I took until failure:
1. Disable driver signature enforcement (I'm on W10)
2. Boot into download mode
3. Use zadig to replace the driver to libusb0
4. Use Heimdall to download the PIT file
5. Doesn't work - it gives me
Since I didn't get Heimdall to work, I thought to give Odin a try:
1. Downloaded Odin3 v3.11
2. TAR'd the TWRP IMG file
3. Tried to flash via Odin
4. Doesn't work - gives me:
My laptop only has USB3 ports, I tried all of them. The cable is fine, I tried another good one which also didn't change anything. I'm not sure if I miss some crucial step or doing something wrong, as I haven't touched the device in years and am not very familiar with flashing it. I'm just looking for the 'easiest' way to get to CM13.
Appreciate any help!
I familiarized myself with the tutorials, and realized I have to re-partition the phone first, which requires TWRP. I downloaded the latest TWRP for the i9100 (3.0.2) and the Heimdall suite. Steps I took until failure:
1. Disable driver signature enforcement (I'm on W10)
2. Boot into download mode
3. Use zadig to replace the driver to libusb0
4. Use Heimdall to download the PIT file
5. Doesn't work - it gives me
Quote:
| Initialising connection... Detecting device... Claiming interface... ERROR: Claiming interface failed! |
1. Downloaded Odin3 v3.11
2. TAR'd the TWRP IMG file
3. Tried to flash via Odin
4. Doesn't work - gives me:
Quote:
| <ID:0/005> Odin engine v(ID:3.1101).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> SingleDownload. <ID:0/005> twrp-3.0.2-1-i9100.img <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! <ID:0/005> <ID:0/005> Complete(Write) operation failed. |
Appreciate any help!
from xda-developers http://ift.tt/1U70TFH
via IFTTT
No comments:
Post a Comment